Table of Contents
Advertisement
Connection diagram:
TV
SAT 1 (Cable marked V)
Sky Q™ Receiver
Key:
A:
Satellite Signal Cable
B:
Satellite Signal Cable
C:
Antenna Control Cable
D:
Flylead from Splitter to LNB on Control Box
E:
Flylead from splitter to SAT IN 2 SKY Q™ Receiver
Connectivity:
The system is for use only with a Sky Q™ Receiver only.
It is important that the 2 Coaxial cables are connected correctly as per the diagram
to ensure function of the system.
The Coaxial Cables have been labelled V (Vertical Signal) and H (Horizontal Signal).
Please ensure that the cable marked H is connected to the splitter input labelled IN.
The 2 x Fly Leads to be connected to the splitter outputs labelled OUT.
1 output from the splitter connects to the Control Box LNB Input
1 output from the splitter connects to the Sky™ Receiver SAT IN 2 Input
Coaxial cable labelled V connects directly to the SKY™ SAT IN 1 input
Sky Q™ Box Set Up:
The Sky™ Box should already be set to Wideband LNB Type as default.
If you find the Target locks onto the Satellite and the SKY™ Receiver has no signal we
suggest you check connections and ensure the LNB type is on Wideband NOT SCR.
Visit: www.maxview.co.uk - Search 'Target' for potential software updates
SAT 2 IN
E
S
A
SAT 2 (Cable marked H)
Splitter
D
C
Not required
B
C
Ignition
5A Fuse
+
Page 11
Advertisement
Table of Contents
