Table of Contents
Advertisement
Interface details
A.
Select satellite
B.
LED shows you which satellite is selected
C.
SEARCH - Press and release
PARK - Press and hold for 3 seconds
D.
Satellite found LED (green FOUND)
How to operate your system
1. Turn on
Switch the power on. The LED flashes green on the last satellite you selected.
2. To change satellite*
*If required. Press SAT to scroll through satellite selection. Eg. New selected SAT LED will flash green.
3. Search
SEARCH - Press and release to begin. Both the OK LED and LED selected will flash during search.
Visit: www.maxview.co.uk - Search 'Target' for potential software updates
A
Power on
Flashes green
Press
Flashes green
Flashes green
B
C
Search
D
Flashes green
Page 13
Advertisement
Table of Contents
