Table of Contents
Advertisement
Connection diagram:
TV
SAT IN 1 (Cable marked V)
SKY Q™ Receiver
Attach Satellite Dish to Antenna Unit
1.
Ensure Antenna Unit is free from obstacles
2.
Press installation button on reverse of Control Box to elevate
antenna. Once elevated turn off power to Control Box and
remove fuse
3.
Fix Satellite Dish to Antenna Arm using M6 Button
Head Screws, M6 Nuts and 6mm Plastic Washers
The 65cm and 85cm satellite dishes have different fixing hole
positions. Therefore 4 of the holes will be unused
4.
Remove all tools, packaging and obstructions from roof
5.
Replace fuse and turn power switch on. Antenna will
automatically retract into the park position
Caution:
Replace Nylon locking nuts if they have been removed more
than twice. The locking action of the Nylon becomes less
effective if repeatedly assembled and disassembled.
SAT IN 2
E
OUT
A
SAT 2 (Cable marked H)
IN
Splitter
OUT
D
Not required
B
C
Ignition
5A Fuse
+
Page 11
Page 11
Advertisement
Table of Contents
