Table of Contents
Advertisement
Fiber Optic Media Converter Box
Installation and Commissioning
Note
The diameter of the power cable depends on the selected seal (see table 2).
Warning!
The power cable passing through the cable gland should have a cable sheath to ensure Ex
conformity.
4.6
Connecting the field Ethernet cable to the FO switch
Up to 4 Ethernet devices can be connected to the FO switch.
1.
Loosen the amount of cable glands (#1) needed as shown in the drawing above in chapter 4.2
and 4.3 (same for AC and DC).
2.
Prepare the trimmed Ethernet cable(s). Adjust the cable gland(s) to the diameter of the cable
(see table in chapter 4.2).
Figure 4.17
27
Advertisement
Table of Contents
