Fiber Optic Media Converter Box
General Description
Partial Redundancy (Multimode, DC)
Figure 2.10
Full Redundancy (Multimode, DC)
Figure 2.11
Warning!
No other device can be connected to the power supply but the already connected media con-
verter. Connecting another device can lead to permanent damage.
Note
When connecting a single-mode fiber optic transceiver, it is recommended to use an attenuator
to avoid damage caused by excessive optical power.
Note
Calculate the "typical distance" to a given fiber optic transceiver as follows: Link Budget (dB) >
Dispersion Loss (dB) + Total Link Loss (dB).
11