Table of Contents
Advertisement
LF52D & LF56D - CASE COVER REMOVAL (continued)
Figure 1
Necessary tool:
- Torx T25 wrench
Procedure:
1. Turn the power source ON/OFF switch to OFF position.
2. Disconnect Input Power from the power source !
3. Remove the 2 screws (A) from the back of the left side feeder panel. See Figure 1
4. Slide back carefully the left side panel and disconnect all the connectors that are connected to the motor
board fixed on the internal side of this panel.
5. Now you have access to the internal part of the feeder as shown in Figure 1a.
For the left side panel re-assembly operations, make the previous steps in the reverse order.
A
Figure 1a
Advertisement
Table of Contents
