Lincoln Electric 50448 Service Manual page 33

Figure 68
Press the left knob [32] or button [34] to exit.
Recording icon will appear on the Status bar
[35].
WARNING
To stop recording please move to Service Menu and
press the Service weld logs icon again.
Weld History – after recording, welding
parameters are saved into the USB device
folder.
To access the Welding history:
Make sure that USB device is connected.
Access to „Configuration" menu.
Go to Service Menu → Weld History
Figure 69
Press right knob [33] to get access of Weld history – the
list of used parameters:
Weld number
Average WFS
Average current [A]
Average voltage [V]
Arc time [s]
Welding program number
Job number/name
SnapShot – create a file that contains detailed
configuration
collected from each module. This file can be
sent to Lincoln Electric Support to troubleshoot any
possible issues that cannot be easily resolved by the user.
To obtain a SnapShot:
Make sure that USB device is connected.
Go to Configuration → Service Menu → Snapshot
and debugging information
Figure 70
Press the right knob [33] to start Snapshot process.
Figure 71