Lincoln Electric VANTAGE 500 (CE) IM894-B Operator's Manual

Lincoln electric welding system user manual

Download this manual

RETURN TO MAIN MENU

IM894-B

VANTAGE 500 (CE)

March, 2010

Safety Depends on You

Lincoln arc welding and cutting

equipment is designed and built

with safety in mind. However,

your overall safety can be

increased by proper installation ...

and thoughtful operation on your

part. DO NOT INSTALL, OPER-

ATE OR REPAIR THIS EQUIP-

MENT WITHOUT READING

THIS MANUAL AND THE SAFE-

TY PRECAUTIONS CONTAINED

THROUGHOUT. And, most

importantly, think before you act

and be careful.

OPERATOR'S MANUAL

Need help?

Do you have a question about the VANTAGE 500 (CE) IM894-B and is the answer not in the manual?

Page 1 RETURN TO MAIN MENU IM894-B VANTAGE 500 (CE) March, 2010 Safety Depends on You Lincoln arc welding and cutting equipment is designed and built with safety in mind. However, your overall safety can be increased by proper installation ... and thoughtful operation on your part.
Page 6 T T h h a a n n k k Y Y o o u u...
Page 13 (VRD)-VOLTAGE REDUCTION DEVICE SWITCH IS LOCATED IN THIS AREA. REMOVE 4 FRONT PANEL SCREWS TO ACCESS (VRD) SWITCH...
Page 19 • Stop engine while fueling. • Do not smoke when fueling. • Keep sparks and flame away from tank. • Do not leave unattended while fueling. • Wipe up spilled fuel and allow fumes to clear before starting engine. • Do not overfill tank, fuel expansion may cause over- flow.
Page 29 Single- and Two-Stage Engine Air Cleaners Single- and Two-Stage Engine Air Cleaners Remove the Filter Remove the Filter Unfasten or unlatch the service cover. Because the filter fits tightly over the outlet tube to create the critical seal, there will be some initial resistance, similar to breaking Rotate the the seal on a jar.
Page 33: Step 2. Possible Cause
Step 3. RECOMMENDED COURSE OF ACTION Step 1. LOCATE PROBLEM (SYMPTOM). Step 2. POSSIBLE CAUSE.

Vantage 500 Vantage 500 ce