Lincoln Electric 50448 Service Manual page 16

Status bar
A B
Figure 10
A - A/B Procedure
B - Information about active welding mode
C - 2/4 - Step
D - USB Memory
E - Access control
F - Cooler
Welding Parameters Bar
The Welding Parameters Bar enables:
Welding process/program change.
Torch trigger function change (GMAW,FCAW),
Add or hide functions and welding parameters – user
setup.
Change the setup.
Table 7 GMAW and FCAW Welding Parameters Bar
Symbol
Select Welding Process
Support
Select Function of Gun Trigger (2-Step /
4-Step)
Pinch
Configuration
User setup
WARNING
Availability of the parameters depend on selected welding
program / welding process.
Table 8 SMAW Welding Parameters Bar
Symbol
Select Welding Process
Support
Arc Force
Hot Start
Configuration
User setup
C D E F
Description
Description
Select Welding Program
To select the Welding Program:
Press the button [34] or right knob [33] to get access of
Welding Parameters Bar.
Use the right knob [33] to highlight the icon "Select
Welding Process".
Press the Right knob [33] to confirm the selection.
Figure 11
Use the right knob [33] to highlight the icon "Select
welding Program".
Figure 12
Press the right knob [33] to confirm the selection.
Figure 13
Use the right knob [33] to highlight the program number.
Press the right knob [33] to confirm the selection.
WARNING
The lists of available programs depends on the power
source.