Lincoln Electric 50448 Service Manual page 20

Figure 23
Confirm selection – press and hold for 3 second right
knob [33].
Figure 24
Rename job – turn right knob [33] to select: numbers 0-9,
letters A-Z, a-z. Press right knob [33] to confirm first
character of the name.
Next characters should be selected in the same way.
To confirm the name of job and go back to the main menu
press button [34] or left knob [32].
USB Memory - when the USB storage device
is connected to USB port user have access to
(Table 10.):
Table 10 USB Menu
Symbol
Save
Load
Description
Save – the following data can be save on a
USB Memory Stick: (Table 11.):
Table 11 Save and restore selection
Symbol
Current Welding Settings
Advanced Parameters Configuration
(P menu)
All welding programs stored in user
memory
M1
One of the welding programs stored in
user memory
M50
To save data into USB device:
Connect the USB to welding machine.
Add "USB Memory" icon to the Welding parameters bar
[41].
Use the right knob [33] to highlight the icon "USB
Memory".
Figure 25
Press the right knob [33] to confirm selection – the USB
menu is shown on the display.
Use the right knob [33] to highlight the icon "Save".
Description