Lincoln Electric 50448 Service Manual page 21

Figure 26
Press the right knob [33] to get access of "Save" option –
the save menu is shown on the display.
Figure 27
Create or choose a file in which will be saved data copies.
Display shows the Save Data Menu on USB Memory
Stick.
Figure 28
Use right knob [33] to highlight data icon which will be
saved in the file on USB Memory Stick. For example:
Advanced Parameters Configuration icon.
Figure 29
Press the right knob [33] to confirm.
Figure 30
To confirm and save the data on USB Memory Stick,
highlight the "Check Mark" icon and then press the
right knob [33].
To exit the "USB Memory" menu – press left button [34] or
disconnect USB Memory
receptacle.
Load – restore data from the USB Device to
the machine memory.
To load the data from USB Memory:
Connect the USB to welding machine.
Add "USB Memory" icon to the Welding parameters bar
[41].
Use the right knob [33] to highlight the icon "USB
Memory".
Figure 31
Stick from the USB