If user does not know the Welding Program Number, it
can be choose manually. In that case please follow below
guide:
Welding Process
Mode change:
Synergy
/ Manual
Electrode
Wire
Material
Electrode
Wire
Diameter
Shielding
Gas
Support
To access the Support Menu:
Press the button [34] or right knob [33] to get access of
Welding Parameters Bar.
Use the right knob [33] to highlight the icon "Support".
Press the right knob [33] to confirm the selection.
Figure 14
The Support Menu enables to get information of the
following points:
Technicial specification.
Accessories.
Welding materials.
Safety guides.
Welding variables effect MIG.
User setup
To access the User Setup:
Press the button [34] or right knob [33] to get access of
Welding Parameters Bar.
Use the right knob [33] to highlight the icon "User setup".
Press the right knob [33] to confirm the selection.
Figure 15
The User Setup Menu enables to add the additional
function and / or parameters to the Welding Parameters
Bar [41] as shown in Table 9.