4. Terminal Setup
It is optional for you to configure the system by connecting a serial cable (not
included in the package) to a COM port on a PC or notebook computer and to
the console port of the Cellular Gateway.
PC/Workstation with
Terminal Emulation Software
Figure 4-1: Cellular Gateway Console Connectivity
A terminal program is required to make the software connection to the Cellular
Gateway.
1. Run terminal program on the OS.
2. When the following screen appears, make sure that the COM port should be
configured as:
Baud: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
8
Serial Port
RS232 DB9 Cable
Figure 4-2: COM Port Configuration
ICG-2510W(G)-LTE
COM1
115200, N, 8, 1