Vl53L8Cx Low-Power High-Performance 8X8 Multizone Time-Of-Flight (Tof) Sensor; Vd6283Tx Hybrid Filter Multispectral Sensor With Light Flicker Engine; How To Use The Kit - ST STEVAL-PDETECT1 User Manual

The STHS34PF80
its field of view. The information is digitally processed by the ASIC, which can be programmed to monitor motion,
presence, or an overtemperature condition.
Thanks to its exceptional sensitivity, the
to 4 meters without the need of an optical lens.
The STHS34PF80
1.5.2

VL53L8CX low-power high-performance 8x8 multizone Time-of-Flight (ToF) sensor

The VL53L8CX
reduced power consumption. Based on STMicroelectronics' FlightSense technology, the sensor is designed to
provide accurate ranging up to 400 cm with a 65° diagonal FoV.
The VL53L8CX
hardware is housed in an innovative "all in one" module. This enables a wider variety of high-performance
usecases, such as low-power system activation, gesture recognition, SLAM for robotics, liquid level monitoring,
and many more.
Thanks to STMicroelectronics' patented algorithms, the
FoV, with a 64-zone depth measurement. The STMicroelectronics' histograms ensure a cover glass crosstalk
immunity above 60 cm.
Like all ToF sensors based on STMicroelectronics' FlightSense technology, the
distance regardless of the target color and reflectance.
The VL53L8CX
The VCSEL of the
safe for the eyes. Scene browsing and multizone detection are possible with the VL53L8CX. This is due to a
software customizable detection array. It detects human presence quickly and at low-power. Such detection is
known as a minidepth map.
1.5.3

VD6283TX hybrid filter multispectral sensor with light flicker engine

The VD6283TX
measurement is fast and accurate thanks to an individual ADC and a readout for each color channel.
The VD6283TX
color temperature (CCT) and Lux information. The
scene light correction.
With a patented architecture and a high-performance photodiode design, the
flickering frequencies to avoid "banding effects" on videos, or check that they are safe for human eye.
The VD6283TX
including LED square signals, that can run flicker operations simultaneously with ALS operations.
1.6

How to use the kit

The STEVAL-PDETECT1
device can be attached to the STWIN.box using the provided flex cable, through the 34-pin connectors available
on both platforms.
The STWIN.box is not included in the kit and must be purchased separately.
UM3320 - Rev 1
sensor has been designed to measure the amount of IR radiation emitted from an object within
STHS34PF80
is housed in a small 3.2 x 4.2 x 1.455 (max) mm 10-lead LGA package.
is an 8x8 multizone, ToF ranging sensor, which enhances performance under ambient light with a
integrates a powerful new generation VCSEL, and two advanced metasurface lenses. The
supports SPI and I²C interfaces for high frequency frame rates and short-boot times.
VL53L8CX emits fully invisible 940 nm IR light. Such VCSEL has a Class 1 certification that is
(1.83 x 1.0 x 0.55 mm) is ST's new color sensor with advanced light flicker extraction. Light
uses hybrid color filters with precise responses allowing accurate computation of the correlated
is the only sensor able to extract different light flicker waveforms from 100 Hz and 2 kHz,
expansion board can be used with the
can detect the presence of a human being at a distance up
VL53L8CX can detect and track multiple targets within the
VD6283TX can be used for display brightness management or
VD6283TX
STEVAL-STWINBX1
UM3320
Getting started
VL53L8CX measures an absolute
can extract light
kit (STWIN.box). The
page 4/22