Table of Contents
Advertisement
Run an AT terminal application (such as the u-blox m-center tool) selecting the AT port, with these
settings:
Data rate
115200 bit/s
See appendix
A
for how to download, configure and use the u-blox m-center AT terminal for Windows.
2.2 Switch off the board
To switch off the LEXI-R520 module in the EVK-LEXI-R520, send the +CPWROFF AT command.
☞
Issue AT+CPWROFF command before switching off the main power supply of the EVK-LEXI-R520
by turning the SW400 main power switch to the "OFF" position (see
and configuration parameters may not be saved in the non-volatile memory of the cellular module.
UBXDOC-686885345-1791 - R02
C1-Public
Data bits
Parity
8
N
Stop bits
1
Board quick start
EVK-LEXI-R520 - User guide
Flow control
HW
Figure
3), otherwise settings
Page 8 of 23
Advertisement
Table of Contents
