Table of Contents
Advertisement
3. Select Standard 33600 bps Modem.
Click Next.
4. Select COM port for data communication
and click Next. The modem will be installed
on this COM port.
5. Click Finish to complete the installation.
6. Now the new modem is visible in Control
Panel, under Phone and Modem > Modems.
Any extra initialization AT command (e.g., to
set a specific APN name) can be entered by
selecting Properties and filling in
Advanced > Extra initialization commands
text box.
Now the module is ready and the connection can be configured.
The modem configuration can also be edited in Device Manager, by clicking on the modem name.
UBXDOC-686885345-1791 - R02
C1-Public
Setting up data connection on Windows
EVK-LEXI-R520 - User guide
Page 11 of 23
Advertisement
Table of Contents
