The RF signal can be connected to the antenna board through the onboard NINA-B4 U.FL connector,
with control signals, as shown in
Figure 16: NINA-B4 connector to custom antenna board
4.4 UART connections to board
EVB-ANT-1 supports a quad-channel UART interface that connects to:
•
MCU
•
NINA-B411 module hosted on the ANT-B family
•
onboard NINA-B411 module hosted on EVK-ANT-B1
Figure 17: UART connections over USB
UBX-22006906 - R07
C1-Public
Figure
16.
EVB-ANT-1
XPLR-AOA-3 - User guide
Page 18 of 46