Gpu Support; Cable Management Arm - Supermicro AS -1015CS-TNR-EU User Manual

A+ server
Table of Contents

Advertisement

6.3 GPU Support

Only single-width, half-length GPUs are supported. Installation is the same as PCIe expansion
cards.
Quantity
Power Cable
Thermal Kit
Conditions

6.4 Cable Management Arm

The system supports a cable management arm (CMA), which keeps the rear cables organized
and clear of the rail mechanisms when the system is extended out the front of the rack for
maintenance.
The CMA attaches to the rack mounting rails by means of four connectors. They are labeled
on the connectors 1, 2, 3, and 4.
Installing the Cable Management Arm
1. Slide CMA connector #1 forward onto the two posts on the rear of the right inner rail
(right side when viewed from the front). It snaps into place.
2. Slide CMA connector #2 forward onto the two posts on the rear of the right middle rail. It
snaps into place.
GPU Support
Two single-width half-length full-height
none required
Upgraded fans: six FAN-0163L4
Supports up to 400W TDP CPU
Figure 6-1. Cable Management Arm
72
Chapter 6: Optional Components

Advertisement

Table of Contents
loading

This manual is also suitable for:

As -1015cs-tnr

Table of Contents