Supermicro AS -1015CS-TNR-EU User Manual page 12

Color, Status
Red, solid
Red, blinking at 1Hz
Red, blinking at 0.25Hz
Red, solid, with Power LED blinking green
Blue and red, blinking at 10Hz
Blue, solid
Blue, blinking at 1Hz
Blue, blinking at 2Hz
Blue, blinking at 4Hz
Blue, blinking at 10Hz with Power LED
blinking green
Information LED
Description
An overheat condition has occurred.
Fan failure, check for an inoperative fan.
Power failure, check for a non-operational power
supply.
Fault detected
Recovery mode
UID has been activated locally to locate the server in
a rack environment.
UID has been activated using the BMC to locate the
server in a rack environment.
BMC is resetting
BMC is setting factory defaults
BMC/BIOS firmware is updating
12
Chapter 1: Introduction