Power And Connect Gwn76Xx Access Point - Grandstream Networks GWN76 Series User Manual

Port Description
Power adapter connector (12V, 2A) for GWN7610
Power
Power adapter connector (24V, 1A) for GWN7600 and GWN7602
Ethernet RJ45 port (10/100/1000Mbps) supporting PoE/PoE+.
* GWN7600 supports PoE (802.3af) only
NET/PoE
* GWN7624 and GWN7661 supports 2x 10/100/1000Mbps Ethernet ports with PSE.
• The maximum output of each PSE port is 6W.
• If powered by PoE+, both LAN 2(PoE OUT -B) and LAN 3(PoE OUT -A) can be used as PSE.
• If powered by PoE, only LAN 3(PoE OUT -A) can be used as PSE.
Ethernet RJ45 port (10/100/1000Mbps) to your router or another GWN76XX series.
* GWN7664 supports 1x 2.5G Port
NET
* GWN7602 LAN1,2 and 3 are 10/100M Ethernet Ports
USB 2.0 port (for future IOT & location-based applications)
* Available on GWN7610 and GWN7600 only
Factory reset button.
RESET Press for 7 seconds to reset factory default settings.
Quick press will only reboot the unit.

Power and Connect GWN76XX Access Point

Step 1:
Connect one end of a RJ-45 Ethernet cable into the NET or PoE/NET port of the GWN76XX unit.
Step 2:
Connect the other end of the Ethernet cable(s) into a LAN port to your Network. (Use PoE/PoE+ switch for GWN76XX).
Step 3:
For GWN7610/GWN7600/GWN7603 and GWN7602, connect the 24V DC power adapter into the power jack on the back of
the access point. Insert the main plug of the power adapter into a surge-protected power outlet. Otherwise, PoE can be used if
the switch port does provide PoE power.
Notes
GWN7602/GWN7603 Ports
GWN76XX AP Ports Description