Login Page; Discover And Pair Other Gwn76Xx Access Point; Figure 25: Setup Wizard - Grandstream Networks GWN7600 User Manual

Login Page

After login, users can use the Setup Wizard tool to go through the configuration setup or exit and
configure it manually. Setup Wizard can be accessed anytime by clicking on while on the web
interface.

Figure 25: Setup Wizard

Discover and Pair Other GWN76xx Access Point

First, note that by default the GWN controller access point will automatically discover all APs connected
to the same LAN (broadcast domain), but starting from firmware 1.0.5.13/1.0.514 a new possibility has
been added in order to pair and provision remote APs using DHCP option 43 with master direction
explained below.
Master Direction
To pair and manage access points located on remote networks, the admin needs to configure the IP
address of master AP on DHCP option 43 which will be send to the slave access point during booting
stage and allow the save/master connection to be established remotely. GWN76XX accepts option 224
encapsulated in option 43, and the syntax is in TLV format. A simple example of DHCP 43 configuration
would be:
224(Type)12(Length)10.157.0.234(Value) translated into Hex as e00c31302e3135372e302e323334
P a g e | 42
GWN7610/GWN7600/GWN7600LR User Manual
Version 1.0.8.18