Step 6:
Turn the GWN clockwise until it locks into place and fits the locking tab.
Note
Ceiling mounting is recommended for optimal coverage performance.
Mounting Instructions for GWN7600LR
Please refer to the following steps to mount your GWN7600LR correctly.
1. Prepare the Cover Bracket by inserting the 4 screws (PM8) into corresponding holes.
2. Attach the Cover Bracket with screws on the vertical/horizontal Mounting Bolt were GWN7600LR will be installed.
3. Assemble the Base Bracket with the Cover Bracket using provided locknuts and screws (PM8).
4. Connect the Ethernet cable (RJ45) to the correct ports of your GWN7600LR.
5. Align the GWN7600LR with the Base Bracket and pull it down to the right position.
6. Install the 2x Assembled screws to fix GWN7600LR on the Mounting Bolt.
Ceiling Mount – Steps 5 & 6
GWN7600LR Vertical Mounting