Mounting Instructions for GWN7602/GWN7603
GWN7602/GWN7603 can be mounted on the wall, Please refer to the following steps for the appropriate installation.
Wall Mount (GWN7602/GWN7603)
1. Use a measuring tape to measure the distance between the two wall mount slots on the back of the GWN7602/GWN7603
access point and use a pencil to mark the mounting screw holes on the wall.
2. Drill the holes in the spots that you have marked and slide the anchors into the wall. Attach the GWN7602/GWN7603
access point to the wall via the wall mount slots.
GETTING STARTED
The GWN76XX Wireless Access Point provides an intuitive web GUI configuration interface for easy management to give users
access to all the configurations and options for the GWN76XX's setup.
This section provides step-by-step instructions on how to read LED patterns, discover the GWN76XX and use its Web GUI
interface.
LED Patterns
The panel of the GWN76XX has different LED patterns for different activities, to help users read the status of the GWN76XX
whether it is powered up correctly, provisioned, in upgrading process and more, for more details please refer to the below
table.
LED Status
Indication
OFF
Unit is powered off or abnormal power supply
GWN7624/GWN7661 Wall Installation
GWN7602/GWN7603 Wall Mount