Static Dhcp - Grandstream Networks GWN76 Series User Manual

DHCP Preferred DNS Set the preferred DNS for DHCP
DHCP Alternated
Set the alternated DNS for DHCP
DNS
NAT Pool
GWN76xx NAT feature defines an address pool from which the Wi-Fi clients will acquire their IP address so that the access
point acts as a lightweight home router.
Notes:
1. This option cannot be enabled when Client IP Assignment is set to Bridge mode.
2. This option is not supported in GWN7610
Field Description
Set the gateway IP address. Note: The gateway address cannot be in the same network segment
Default Gateway
as the uplink network.
DHCP Server Subnet
Set the gateway mask.
Mask
DHCP Lease Time Set the DHCP Lease time.
DHCP Preferred DNS Set the preferred DNS for DHCP
DHCP Alternate DNS Set the alternated DNS for DHCP

Static DHCP

Users can use this feature in order to set static DHCP that binds to certain clients, to whom you do not want the IP address to
change.
To configure Static DHCP, please follow below steps:
1. Click button to create a new entry.
2. Enter the name of the device, along with its MAC address and IP address
Press Save and Apply to submit the changes.
DHCP Relay
DHCP Relay is a network device that forwards IP addresses from the DHCP Server to clients devices, even if the DHCP server is
on a different network (ex: VLAN). This way we can have a dedicated DHCP server on many networks. GWN access points can
be configured as a DHCP relay agent. Please follow the steps below:
DHCP Server Parameters
NAT Pool Parameters
DHCP Binding