Transfer To Master - Grandstream Networks GWN76 Series User Manual

Transfer to Master

From the Master Access Point, the Administrator do have the capability to assign any Slave Access point to become the new
Master to manage all the already paired Access points. Except for GWN7602.
Navigate to Web UI → Access Points → Status, refer to the figure below:
Click on button, the following warning message will prompt in order to confirm the procedure:
When the process is finished, the original Master will turn to be a slave for the new Assigned Master, and to login to the new
Master AP web interface, you will need to use the previous Master Admin password.
Note
All the previously existed paired APs will be provisioned with the new Master AP.
The Switch to Master option is unlimited action and does not require any reset for the already paired APs.
Takeover – Step 3
Switch to Master
Transfer Master Role to another device confirmation message
Then new assigned Master AP web interface