Wall Mount - Grandstream Networks GWN76 Series User Manual

GWN7624/GWN7625/GWN7664/GWN7660/GWN7662/GWN7661/GWN7665/GWN7660LR/GWN7664LR/GWN7630/GWN7615/
GWN7610/GWN7605/GWN7605LR/GWN7600LR/GWN7630LR can be powered using PoE(802.3af)/PoE+(802.3at) switch via
PoE/NET port while GWN7600 can be powered using PoE (802.3af) switch via PoE/NET port. In this case, both power and
network connectivity will be provided over the PoE/NET port.
GWN7600/GWN7610 has a PoE detection daemon that will monitor the status and update maximum allowable power for USB
ports in real time.
Step 4:
Wait for the GWN76XX to boot up and acquire an IP address from the DHCP Server.
Warranty
If the GWN76XX Wireless Access Point was purchased from a reseller, please contact the company where the device was
purchased for replacement, repair, or refund.
If the device was purchased directly from Grandstream, contact our Technical Support Team for an RMA (Return Materials
Authorization) number before the product is returned. Grandstream reserves the right to remedy warranty policy without prior
notification.
Wall/Ceiling Mount Installation GWN76XX
GWN7625/GWN7664/GWN7660/GWN7630/GWN7610/GWN7615/GWN7600/GWN7605/GWN7662/GWN7665 can be
mounted on the wall or ceiling, please refer to the following steps for the appropriate installation. This is the GWN7600
example:

Wall Mount

Step1:
Position the mounting bracket at the desired location on the wall with the arrow pointing up.
Step 2:
Use a pencil to mark the four mounting holes (screw holes DIA 5.5mm, reticle hole DIA 25mm).
Step 3:
Insert screw anchors into the 5.5 mm holes. Attach the mounting bracket to the wall by inserting the screws into the anchors.
Connecting GWN AP – GWN7600 as example
Wall Mount – Steps 1 & 2