Power And Connect Gwn7600Lr Access Point - Grandstream Networks GWN7600LR User Manual

Power and Connect GWN7600LR Access Point

1. Connect one end of a RJ-45 Ethernet cable into the PoE/NET port of the GWN7600LR.
2. Connect the other end of the Ethernet cable(s) to a PoE switch connected to your LAN network.
3. Wait for the GWN7600LR to boot up and acquire an IP address from the DHCP Server.
Mounting Instructions
Please refer to the following steps for the mounting your GWN7600LR correctly.
1. Prepare the Cover Bracket by inserting the 4 screws (PM8) into corresponding holes.
2. Attach the Cover Bracket with screws on the vertical/horizontal Mounting Bolt were GWN7600LR
will be installed.
3. Assemble the Base Bracket with the Cover Bracket using provided locknuts and screws (PM8).
4. Align the GWN7600LR with the Base Bracket and pull it down to the right position.
5. Install the 2x Assembled screws to fix GWN7600LR on the Mounting Bolt.
6. Connect the Ethernet cable (RJ45) to the correct ports of your GWN7600LR.
Figure 3: GWN7600LR Vertical Mounting
GWN7600LR User Manual
P a g e | 18