Table of Contents
Advertisement
4.5.4 UPS Default Data and Special Function Execution
4.5.4.1 After the UPS completely starts up, press the
Q1
4.5.4.2 Press the
key to scroll through the UPS settings. The LCD will display in sequence figure Q1~Y.
R1
S1
Bypass Voltage is adjusted to wide range
T
Frequency Window is ± 3 Hz.
V1
The UPS is operating in "normal mode".
V3
The UPS is operating in "CVCF 50 Hz mode"
W
Output Voltage Adjustment (±6.0V,0.1V/Per-scale)
Y
The parallel function is disabled.
buzzer "On"
Self-test is not "On"
key to change the LCD display to figure Q1.
Q2
R2
S2
U
V2
V4
X
10
buzzer "Off"
Self-test is "On"
Bypass Voltage is adjusted to narrow range
Inverter output voltage
The UPS is operating in "Eco mode".
The UPS is operating in "CVCF 60 Hz mode"
UPS position in parallel mode
Advertisement
Table of Contents
