Safety Measures - GCC Technologies Spirit Maintenance Manual

Table of Contents

Advertisement

1.2.2 Product Label
This label is located at the right-back side of machine. All the product information such as
Serial Number, Model Numbers, Laser Power and Electric power can be found here.
Before requiring any further tech support, always provide the service person with the
information on this label.

1.2.3 Safety Measures

LASER RADIA TION W ARNING: Exposure to laser radiation may result in
physical burns and severe eye damage. Proper use and regular maintenance
of this machine is important to the safety of all people in the immediate area.
• Prior to operation, carefully read and familiarize yourself with the warning labels
located on both your laser system and in this manual.
• Never leave the machine unattended during the laser cutting and engraving
process. The laser may ignite combustible materials. A well-maintained fire
extinguisher and operational smoke or fire detector should be kept in the
vicinity of the machine.
• Caution—Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
Resulting debris from laser cutting are very dangerous and may cause fire
hazard.
DO NOT leave debris and scraps inside laser machine after job finished.
Always keep machine clean after job finished.
NOTE
Each Spirit, Spirit LS, and Spirit GLS is shipped with a single pair of safety goggles. If
additional safety goggles are required, please contact GCC directly or an authorized GCC
distributor. If you wish to purchase one on your own, please make sure the safety goggles
meet these requirements:
NOTE
Each Spirit GLS Hybrid with dual lasers installed, the machine is shipped with a single pair
of safety goggles. If additional safety goggles are required, please contact GCC directly or
an authorized GCC distributor. If you wish to purchase one on your own, please make sure
the safety goggles meet these requirements:
Spirit/Spirit LS/Spirit GLS Maintenance Manual V.6
9000-11000nm OD5+
Visible Light Transmission: 92.9%
190 - 534 nm OD5+
910-1070 nm OD6+
Visible Light Transmission: 23.5%
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spirit lsSpirit glsSpirit gls hybrid

Table of Contents