Maintaining Motion System - Lubrication Of The X & Y Rails - GCC Technologies Spirit Maintenance Manual

Table of Contents

Advertisement

8.2 Maintaining Motion System - Lubrication of the X & Y Rails
In order to keep the motion system running smoothly, the X and Y rails of the motion
system will need lubrication on weekly base. Apply 0.1ml of lubrication syringe in
accessory box to
base, while apply a small amount of light grade machine oil or PS2 grease to a paper
or cotton towel and apply to the X rail of Spirit model, and Y rails of Spirit, Spirit LS
and Spirit GLS models weekly. You can purchase PS2 grease from NSK dealers
worldwide. Please visit http://www.nsk.com/eng/company/network/index.html for
additional information
NOTE
• Clean and lubricate the X linear rail of Spirit LS and GLS models with 0.1ml grease
from syringe every two weeks to properly maintain the motion system.
The lubrication oil for the X linear rail on Spirit LS and Spirit GLS must to be
ordered from GCC LaserPro and its authorized dealers. Other unknown grease
may damage the rail's life time and performance.
Always clean and lubricate the X and Y rails of Spirit, and Y rails of Spirit LS &
GLS
models after working with materials that produce lots of debris (such as wood).
• Too much oil or PS2 grease applied to the Y rails will accelerate the debris building
up.
The X rail of Spirit LS and Spirit GLS models has linear bearing design which
needs lubrication regularly depending on the job loading, recommend on
bi-weekly base. Follow below procedures.
1. Take out the Grease Syringe from accessory box
2. Remove the lubrication slot plate on the X rails
3. Inject 0.1ml of grease to the injection opening inside the linear bearing, and
move the lens carriage to smooth the grease and movement
4. Repeat the step 3 till the grease is full out of the linear bearing
5. Repeat the step 3 and 4 to the injection opening in opposite side of the linear
bearing
6. Seal the lubrication slot plate back to the X rail
Remove the lubrication slot plate
the X liner rail of Spirit LS and Spirit GLS models on bi-week
Spirit/Spirit LS/Spirit GLS Maintenance Manual V.6
150

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spirit lsSpirit glsSpirit gls hybrid

Table of Contents