Burn In Test; Hardware Test - GCC Technologies Spirit Maintenance Manual

Spirit/Spirit LS/Spirit GLS Maintenance Manual V.6

7.4.3 Burn In Test

Pressing and holding "Start/Stop" key and turn on machine; after the machine is boot, a file
with name "Burn_In_Test" will be generated and output automatically, this file will
permanently run unless user stop it .

7.4.4 Hardware Test

To enter the Hardware Test , hold down the 「Auto Focus」 button and turn on the
machine. Following the instruction, pressing ▼、▲ to go to previous or next page.
138