7.3.3 GT series laser tube LED indicators
Indicator LEDs
LED
Indicator
Color
LASER
Green
READY
OVERTEMP
Yellow
FAULT
Red
LASE LED
Red
POWER
Green
INTERLOCK
Yellow
7.4 Hidden Diagnostics
7.4.1. Hidden Function
To enter the Hidden Function , hold down the ▽ button and turn on the machine.
7.4.2 Setting Origin
Pressing and holding "Enter" key and turn on the machine Adjust X、Y position by pressing
arrow key Pressing 「F4」 to Save
Illumination Convention
Lights (cw) when the laser controller is ready
for operation
Lights (cw) when the RFPA is getting too
hot*
Lights (or blinks) when the controller is in a
Fault state
Lights with varying brightness whenever RF
power is generated
Lights (cw) whenever DC power is applied
Lights (cw) when the interlock pin connected
to ground
Spirit/Spirit LS/Spirit GLS Maintenance Manual V.6
Image
137