Table of Contents
Advertisement
Enable device auto power on
Press
button on your remote control and select
/
Auto Power On.
Set to On to turn on HDMI & CEC compatible external devices when the TV is turned on.
This feature is applicable when TV input source is pre-set to the corresponding external device.
Enable TV auto power on
Press
/
button on your remote control and select
Power On.
Set to On to turn on the TV when HDMI & CEC compatible external devices are turned on.
HDMI format function
Press
button on your remote control and select
/
Format.
Please select Enhanced format if your HDMI device supports 4K HDR. If it does not support 4K HDR, please
select Standard format.
Note:
•
HDMI cables must be used to connect HDMI & CEC compatible devices to your TV.
•
The HDMI & CEC feature of the connected device must be turned on.
•
If you connect a HDMI device that is not HDMI & CEC compatible, the HDMI & CEC control features will
not work.
•
Depending on the connected HDMI device, the HDMI & CEC control feature may not work.
•
The HDMI & CEC feature supports One Touch Play, Routing Control, System Standby, Device OSD Name
Transfer, Remote Control Pass Through, Give Device Power Status, System Audio Control.
Related information
HDMI & CEC Issues
on page 79
Control the TV with a Keyboard, Mouse or Gamepad
Connect a keyboard, mouse or gamepad to control your TV with ease.
Connect a USB keyboard, mouse or gamepad
Plug the keyboard, mouse or gamepad cable into the USB port of your TV.
Connect a Bluetooth keyboard, mouse or gamepad
Locate the Bluetooth device by pressing
Network > Bluetooth > Equipment Management.
Note:
•
Keyboard, mouse, or gamepad connected via USB or Bluetooth technology may not be usable with some
Apps.
•
Bluetooth function may not be supported depending on the models/countries/regions.
•
For more information about how to connect a Bluetooth device, refer to the Bluetooth device's user
manual.
Connecting to External Devices
/
Settings > System > HDMI & CEC > Device
Settings > System > HDMI & CEC > TV Auto
Settings > System > HDMI & CEC > HDMI
button on your remote control and select
36
Settings >
Advertisement
Table of Contents
