Hisense MT9900 VIDAA U6 EUEM E-Manual page 56

Check the Internet Connection Status
Press / button on your remote control and select
Test the current network connection status and view the current network information.
Connection Test
Press / button on your remote control and select
Connection Test.
Start a network connection test.
Network Information
Press button on your remote control and select
/
Network Information.
You can select IPv4 or IPv6 in IP Version to view more detailed information about your network connection.
Related information
My TV cannot connect to the network.
Connect to a Wired (Ethernet) Network
Connect to a Wireless Network
Turn on the TV through the Internet
Wake on Cast
Press / button on your remote control and select
You can enable or disable Wake on Cast function which is able to turn on the TV by screen casting through
mobile devices.
Note:
• This function may not be applicable in some models/countries/regions.
• Enabling this function may result in higher energy consumption.
Wake on LAN
Press / button on your remote control and select
With a wired Ethernet connection and enabling Wake on LAN, you can switch on the TV from standby and
push content to be viewed on the TV with a mobile device App supporting the screencast function.
Note:
• To use this function, make sure your TV and mobile device are connected to the same network
environment.
• Enabling this function may result in higher energy consumption.
• This function may not be applicable in some models/countries/regions.
Wake on wireless network
Press / button on your remote control and select
Network.
Settings Overview
on page 70
on page 6
on page 7
55
Settings > Network > Internet Connection.
Settings > Network > Internet Connection >
Settings > Network > Internet Connection >
S ettings > Network > Wake on Cast.
Settings > Network > Wake on LAN.
Settings > Network > Wake on Wireless