Table of Contents
Advertisement
After connecting to a wired (Ethernet) network, press
Settings > Network > Network Configuration.
Set the TV network by selecting Network Configuration and press
•
Connection Type
Choose a wired (Ethernet) network connection to access the Internet.
•
Ethernet
Display network status.
•
IP Settings
In IP Version, you can select from IPv4 and IPv6. When IPv4 is selected, the IP address, netmask,
gateway, DNS Server 1 and DNS Server 2 will be automatically defined, or you can configure them
manually for your network connection. When IPv6 is selected, all information is automatically defined.
Related information
Network
on page 54
Network Issues
on page 78
My TV cannot connect to the network.
Connect to a Wireless Network
To connect to an available wireless network, make sure that you turn on your wireless router and have the
wireless router's SSID and password before attempting to connect.
To get access to the Internet using a wireless connection, press
select
Settings > Network > Network Configuration.
Set the TV network by selecting Network Configuration and press
•
Connection Type
Choose a wireless network connection to access the Internet.
First-Time Use
/
on page 70
7
button on your remote control, and select
button to enter the submenu.
/
button on your remote control, and
button to enter the submenu.
Advertisement
Table of Contents
