With a wireless network connection and enabling Wake on Wireless Network, you can switch on the TV
from standby and push content to be viewed on the TV with a mobile device App supporting the screencast
function.
Note:
•
To use this function, make sure your TV and mobile device are connected to the same network
environment.
•
Enabling this function may result in higher energy consumption.
•
This function may not be applicable in some models/countries/regions.
Related information
Connect to a Wired (Ethernet) Network
Connect to a Wireless Network
General
You can set up system settings.
Note:
•
The menus displayed vary depending on models/countries/regions.
Set Time
Press
/
button on your remote control and select
Set the current time based on your location.
•
Time Format
Set the time display to be 12 or 24-hour format.
•
Date/Time
Set the Date and Time. You can set the date and time to automatically sync with Internet/broadcast or
manually setup by yourself.
This function may not be applicable in some models/countries/regions.
•
Time Zone
Select your time zone.
This function may not be applicable in some models/countries/regions.
•
Daylight Saving
Select whether to apply Daylight Saving Time to the TV.
This function may not be applicable in some models/countries/regions.
Use Timer
Press
/
button on your remote control and select
Adjust the timer settings to suit your preference.
•
Sleep Timer
Set the sleep timer to automatically turn the TV off at the specified time.
Settings Overview
on page 6
on page 7
56
Settings > System > Time.
Settings > System > Timer Settings.