Call Hold - ZyXEL Communications P-2302RL-P1 Support Notes

# This field is a sequential value, and it is not associated with a specific rule.
The sequence is important, however. The ZyXEL Device checks each rule in
order, and it only follows the first one that applies.
Activate Select this to enable this rule. Clear this to disable this rule.
Incoming Call
Enter the phone number to which this rule applies.
Number
Enter the phone number to which you want to forward incoming calls from
Forward to
the Incoming Call Number. You may leave this field blank, depending on
Number
the Condition.
Select the situations in which you want to forward incoming calls from the
Incoming Call Number, or select an alternative action.
Unconditional - The ZyXEL Device immediately forwards any calls from the
Incoming Call Number to the Forward to Number.
Busy - The ZyXEL Device forwards any calls from the Incoming Call
Number to the Forward to Number when your SIP account already has a
call connected.
Condition
No Answer - The ZyXEL Device forwards any calls from the Incoming Call
Number to the Forward to Number when the call is unanswered. (See No
Answer Waiting Time.)
Block - The ZyXEL Device rejects calls from the Incoming Call Number.
Accept - The ZyXEL Device allows calls from the Incoming Call Number.
You might create a rule with this condition if you do not want incoming calls
from someone to be forwarded by rules in the Forward to Number section.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click this to set every field in this screen to its last-saved value.

Call Hold

Prestige allows user agent to interrupt on the flow of an existing call.
Call hold allows you to put a call (A) on hold by pressing the flash key.
If you have another call, press the flash key to switch back and forth between the callers A and B by putting
All contents Copyright  2007 ZyXEL Communications Corporation.
P2302RL-P1 Support Notes
84