Table of Contents
Advertisement
b. Press "MAINTENANCE" from the left menu.
c. Press "F/W Upload" tab.
d. Press "browse" button and point to the directory where the firmware you want to upload is kept and
press "Upload" button.
e. It will prompt you the firmware is uploading successful and The ZyXEL Device will reboot.
How do I upgrade/backup the ZyNOS firmware by using FTP client program via LAN?
The ZyXEL Device allows you to transfer the firmware from/to The ZyXEL Device by using FTP program via
LAN. The procedure for uploading ZyNOS via FTP is as follows.
a. To upgrade firmware, use FTP client program to put firmware in file 'ras' in the ZyXEL Device. After
data transfer is finished, the ZyXEL Device will program the upgraded firmware into FLASH ROM and
reboot itself. Note: Do not power off the unit after upload the file via ftp until the system LED have
become steady light up. Fail to due so may result in update fail and require RMA.
b. To backup your firmware, use the FTP client program to get file 'ras' from the ZyXEL Device.
How do I upload or backup ROMFILE via web configurator?
In some situations, you may need to upload the ROMFILE, restore to previous saved configuration, or the
need of resetting SMT to factory default.
The procedure for uploading ROMFILE via the web configurator is as follows.
a. Log on into the web configurator.
b. Press "MAINTENANCE" from the left menu.
c. Press "Configuration" tab.
d. Press "Restore" tab and press browse button point to the directory where the rom file you want to
upload is stored.
e. Press "Upload" button.
The procedure for backup ROMFILE via the web configurator is as follow
a. Log on into the web configurator.
b. Press "MAINTENANCE" from the left menu.
c. Press "Configuration" tab.
All contents Copyright 2007 ZyXEL Communications Corporation.
P2302RL-P1 Support Notes
103
Advertisement
Table of Contents
