ZyXEL Communications P-2302RL-P1 Support Notes page 21

same error if you try to activate a Generic filter rule in a filter set that has already had one or more active
TCP/IP (or IPX) filter rules.
Menu 21.1.1:
Filter #: 1,1
Filter Type= Generic Filter Rule
Active= Yes
Offset= 0
Length= 0
Mask= N/A
Value= N/A
More= No
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule
Menu 21.1.2:
Filter #: 1,2
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 0
Destination: IP Addr= 0.0.0.0
TCP Estab= N/A
Menu 21.1.1 - Generic Filter Rule
Log= None
Menu 21.1.2 - TCP/IP Filter Rule
IP Source Route= No
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
Source: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
All contents Copyright  2007 ZyXEL Communications Corporation.
P2302RL-P1 Support Notes
21