Call Hold Setup; Call Waiting Setup - ZyXEL Communications Prestige 2302RL Support Notes

Apply
Reset

Call Hold setup

Prestige allows user agent to interrupt communications on an existing call.
Call hold allows you to put a call (A) on hold by pressing the flash key.
If you have another call, press the flash key to switch back and forth between caller A and B by putting either
one on hold.

Call Waiting setup

This allows you to place a call on hold while you answer another incoming call on the same telephone number.
If there is a second call to your telephone number, you will hear a call waiting tone.
Scenario
A calls B and start conversation
C calls A
In this scenario, there are 3 kinds of action available:
Below call flow graphs could help you better understand the call waiting working mechanism.
Scenario 1: If A presses flash key + 0, A will reject C.
calls). Select the mode that your voice service provider supports.
Select Europe Type to use the supplementary phone services in
European mode.
Select USA Type to use the supplementary phone services American
mode.
Note: To take full advantage of the supplementary phone services
available though the Prestige's phone ports, you may need to subscribe to
the services from your voice service provider.
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2302RL Support Notes
109