ZyXEL Communications P-2302RL-P1 Support Notes page 53

configured. If the ZyXEL Device's DHCP is also enabled, the IP pool for the clients can be any of the three
networks.
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras> ip ro st
Dest FF Len Interface Gateway
192.168.3.0 00 24 enif0:1
192.168.2.0 00 24 enif0:0
192.168.1.0 00 24 enif0
ras>
Two new protocol filter interfaces in menu 3.2.1 allow you to accept or deny LAN packets from/to the IP alias
1 and IP alias 2 go through the ZyXEL Device. The filter set in menu 3.1 is used for main network configured
in menu 3.2.

IP Alias Setup
1. Edit the first network in menu 3.2 by configuring the ZyXEL Device's first LAN IP address.
DHCP= Server
Client IP Pool:
Starting Address=
Size of Client IP Pool= 32
First DNS Server= From ISP
IP Address= N/A
Second DNS Server= From ISP
IP Address= N/A
Third DNS Server= From ISP
IP Address= N/A
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel:
192.168.3.1
192.168.2.1
192.168.1.1
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
192.168.1.33
All contents Copyright  2007 ZyXEL Communications Corporation.
P2302RL-P1 Support Notes
Metric stat Timer Use
1 041b 0
1 041b 0
1 041b 0
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= Yes
0
0
0
53