Using Syslog - ZyXEL Communications P-2302RL-P1 Support Notes

Using SysLog

4. ZyXEL Device Setup
Configuration:
1. Active, use the space bar to turn on the syslog option.
2. Syslog IP Address, enter the IP address of the UNIX server that you wish to send the syslog.
3. Log Facility, use the space bar to toggle between the 7 different local options.

UNIX Setup
1. Make sure that your syslogd starts with
-r , this option will enable the facility to receive message from the network using an Internet domain socket with
the syslog services. The default setting is not enabled.
2. Edit the file /etc/syslog.conf
local1.*
Where /var/log/zyxel.log is the full path of the log file.
3. Restart syslogd.

CDR log(call messages)
Format:
-r argument.
by adding the following line at the end of the
/var/log/zyxel.log
All contents Copyright  2007 ZyXEL Communications Corporation.
P2302RL-P1 Support Notes
/etc/syslog.conf file.
49