ZyXEL Communications P-2302RL-P1 Support Notes page 76

MWI (Message
Waiting
Indication)
Enable
Expiration Time
Fax Option
G ． 711
Fax
Passthrough
T．38 Fax Relay
Call Forward
Call Forward
Table
Caller Ringing
Enable
On Hold
Enable
<Back
Apply
Reset
Select this if you want to hear a waiting (beeping) dial tone on your phone
when you have at least one voice message. Your VoIP service provider
must support this feature.
Keep the default value, unless your VoIP service provider tells you to
change it.Enter the number of seconds the SIP server should provide the
message waiting service each time the ZyXEL Device subscribes to the
service. Before this time passes, the ZyXEL Device automatically
subscribes again.
This field controls how the ZyXEL Device handles fax messages.
Select this if the ZyXEL Device should use G.711 to send fax messages.
The peer devices must also use G.711
Select this if the ZyXEL Device should send fax messages as UDP or
TCP/IP packets through IP networks. This provides better quality, but it may
have interoperability problems. The peer devices must also use T.38
Select which call forwarding table you want the ZyXEL Device to use for
incoming calls. You set up these tables in VoIP > Phone Book > Incoming
Call Policy.
Select the check box if you want to specify what tone people hear when
they call you. The ZyXEL Device provides a default tone
Select the check box if you want to specify what tone people hear when you
put them on hold. The ZyXEL Device provides a default tone
Click this to return to the SIP Settings screen without saving your changes.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
All contents Copyright  2007 ZyXEL Communications Corporation.
P2302RL-P1 Support Notes
76