Table of Contents
Advertisement
How do I upload the ZyNOS firmware code via embeded web configurator?
The procedure for uploading ZyNOS via embeded web configurator is as follows.
a. Log on into the web configurator.
b. Press "MAINTENANCE" from the left menu.
c. Press "F/W Upload" tab.
d. Press "browse" button and point to the directory where the firmware you want to upload is kept and
press "Upload" button.
e. It will prompt you the firmware is upload successful and Prestige will reboot.
How do I upgrade/backup the ZyNOS firmware by using FTP client program via LAN?
The Prestige allows you to transfer the firmware from/to Prestige by using FTP program via LAN. The
procedure for uploading ZyNOS via FTP is as follows.
a. To upgrade firmware, use FTP client program to put firmware in file 'ras' in the Prestige. After data
transfer is finished, the Prestige will program the upgraded firmware into FLASH ROM and reboot
itself. Note: Do not power off the unit after upload the file via ftp until the system LED have become
steady light up. Fail to due so may result in update fail and require RMA.
b. To backup your firmware, use the FTP client program to get file 'ras' from the Prestige.
How do I upload or backup ROMFILE via web configurator?
In some situations, you may need to upload the ROMFILE, restore to previous saved configuration, or the
need of resetting SMT to factory default.
The procedure for uploading ROMFILE via the web configurator is as follows.
a. Log on into the web configurator.
b. Press "MAINTENANCE" from the left menu.
c. Press "Configuration" tab.
d. Press "Restore" tab and press browse button point to the directory where the romfile you want to upload
is stored.
e. Press "Upload" button.
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2304 Support Notes
76
Advertisement
Table of Contents
