Cooling And Airflow; Ethernet Data Ports - ATTO Technology XstreamCORE ET 8100T Installation And Operation Manual

2-port 10gb ethernet to 1-port 12gb sas intelligent bridge
Table of Contents

Advertisement

ATTO XstreamCORE ET 8100T
The ATTO XstreamCORE 8100T is a simple and easy-to-use intelligent bridge that adds 10-Gigabit Ethernet connectivity to 6 and 12-
Gigabit SAS Tape drives.
The XstreamCORE 8100T can be used as a desktop device or
mounted in a specially designed
ATTO) for easy integration into 19" racks. Each rack-mount
hardware tray can support up to 4 individual units.
Dimensions
Width: 4.0 inches (103.5 mm)
Length: 9.4 inches (240 mm)
Height: 1.2 inches (30.5 mm)
Weight: approx. 2.05 pounds (0.93 kg) with SFPs

Cooling and airflow

Operating temperature: 5-40 °C external at 10,000 feet
Humidity: 10-90% non-condensing
Air enters from the front and is exhausted out the connector
side. Ambient air near the inlets should not exceed 40°C. The
unit automatically stops operation if the temperature goes
beyond this threshold.
Do not block the enclosure's vents.
In the event of a temperature surge or overheating,
the ALERT LED will turn ON, stop all data transfers and cut off
power down the main rails. A full power cycle will be needed to
turn the device back on.
1U rack-mount tray
(from
Power
The 8100T features an external 12V DC power jack (male) to
be used with the power supply adapter that is provided with
the unit.
Input: 100-240VAC ~50-60Hz, 1.4A max
Output: 12.0VDC, 5.0A. 60W
Product warranties will be voided if an alternate
power supply is used.
The power requirements of the ATTO XstreamCORE 8100T
plus the power draw of other equipment in the rack must not
overload the supply circuit and/or wiring of this rack.

Ethernet data ports

The dual independent 10Gb/s Ethernet ports connect the
XstreamCORE 8100T to Ethernet hosts using optical SFP+
connectors or Copper SFPs (SFP+ to RJ-45 adapter) using RJ-
45 cabling. Make sure all cables are anchored securely at
both ends with the proper connectors.
Ethernet data ports also support direct-attach SFP+
Cabling for uplink connections to the switching fabric. This
maybe suitable for short-distance connections.

Advertisement

Table of Contents
loading

Table of Contents