Connect to Targets
The ATTO iSCSI Initiator provides manual and automatic
login/logout to iSCSI target ports. Automatic login occurs
immediately after the system is booted or after the network
interface is re-established. The Auto Login check box must be
selected to provide automatic logins.
You can manually log in to any visible iSCSI targets
from the Status tab.
1. Click on the Status tab. A list of one or more ports is
displayed.
2. Select the target port.
3. Click Login at the bottom of the tab. The highlighted
target status changes to connected.
4. Continue selecting other ports or view the iSCSI
parameters established for each port during login.
•
Highlight the target's port.
•
Click on Parameters. A popup dialog box displays the
Login Parameters.
5. When you have finished viewing the parameters, click on
Close.
6. Click on the LUNs tab. View LUNs exposed by the target.
Exhibit 11 – Connecting to Targets