Table of Contents
Advertisement
Add Targets
The ATTO iSCSI Initiator maintains a list of added targets that
have been discovered after the Mac is reconnected to a
network.
Targets are listed under Discovered Targets in the central
panel. Targets that have been previously added appear as
light grey.
1.
Highlight the target(s) to be added. Multiple targets
may be highlighted at one time.
2.
Click on Add.
The highlighted targets appear in the left-hand panel.
• If you want to add more targets, return to Step 1.
•
If you want to discover more targets, return to
discovery
•
If you want to manage targets, continue to
Targets
Managing Targets
After discovering targets, ATTO Xtend SAN software allows
you to connect to and remove targets, configure security, and
view or configure a number of useful features.
ATTO Xtend SAN software provides the capability to:
• Select target ports for connection.
• Specify automatic login at boot time.
• Connect to targets.
• Remove targets.
• Configure security for each target.
• View the iSCSI login parameters established during a
connection.
• Configure iSCSI login parameters for each connection.
• View a list of LUNs exposed by the target.
You must first select targets in order to manage them.
Targets are listed in the left-hand panel. Icons next to each
target indicate the status of the target:
• Red indicates not connected.
• Green indicates connected.
• X indicates the target is unavailable.
Click on the target you wish to manage. The central panel
contains tabs for Setup, Status and LUNs. Use the following
instruction for the task you wish to accomplish.
Exhibit 8 - Adding Targets
DNS/IP
Managing
Exhibit 9 – Selecting Targets
Advertisement
Table of Contents
