Table of Contents
Advertisement
The firmware on the ATTO XstreamCORE 8100T is field
upgradable. From time to time new firmware may be
released to include the latest enhancements, new features,
and bug fixes.
The XstreamCORE firmware is distributed as a .zbd file from
the ATTO Technology web site at www.atto.com. Download
the file and note the filename.
Using SFTP
Establish an SFTP link to the storage controller that is to
be flashed.
The storage controller SFTP server is at port 20, not
the default port 22.
6 Update Firmware
As an example, using OpenSSH, the SFTP connection is
made with the following command using username
'admin', the password set in
x.x.x.x as the IP address of the XstreamCORE.
sftp -P 20
admin@x.x.x.x
Enter your password when prompted.
Once logged in, upload the zbd file using the "put"
command. For example:
put c:\firmware\xc8100_3_00_101F.zbd
The firmware update process may take several minutes.
Use CLI command FlashStatus to check the progress of
the firmware update. FlashStatus will indicate when the
update has completed pending a restart.
Upon a successful firmware update, restart the
XstreamCORE using the FirmwareRestart CLI command
to apply the new firmware.
Modify
passwords, and
Advertisement
Table of Contents
