Appendix C Standards And Compliances; Regulatory Notices - ATTO Technology XstreamCORE ET 8100T Installation And Operation Manual

2-port 10gb ethernet to 1-port 12gb sas intelligent bridge
Table of Contents

Advertisement

The equipment described in this manual generates and uses radio frequency energy. If this equipment is not used in strict
accordance with the manufacturer's instruction, it can and may cause interference with radio and television reception.

Regulatory Notices

Notice for USA (FCC)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
Notice for Canada (ICES)
This Class A digital apparatus complies with Canadian CAN ICES-003(A) / NMB-003(A).
Cet appareil numérique de la classe A est conforme à la norme NMB-003(a) du Canada.
Notice for Japan (VCCI)
Translation: This is Class A equipment. Operation of this equipment in a residential environment could cause radio interference. In
such a case, the user may be required to take corrective actions. VCCI-A
Notice for European Union (CE Mark)
This equipment is in compliance with the European Union EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, RoHS
2011/65/EU, (EU) 2015/863
Standards:
This equipment is in conformity with the following standards or documents.
Electromagnetic Compatibility (Class A):
FCC CFR 47 Part 15 Subpart B:2023
ICES-003 Issue 7
EN 55032:2015/A11:2015
BS EN 55032:2015/A11:2015
AS/NZS CISPR 32:2015 +AMD 1:2020
VCCI CISPR 32:2016
EN55035:2017/A11:2020
BS EN55035:2017/A11:2020

Appendix C Standards and Compliances

Product Safety
IEC 62368-1:2018 (CB Scheme)
EN IEC 62368-1:2020+A11:2020
UL 62368-1:2019
CSA C22.2 N0. 62368-1:19
EN/IEC60825-1, Class 1 Laser **
** When used with approved optical modules

Advertisement

Table of Contents
loading

Table of Contents