Table of Contents
Advertisement
Command Explanations
AccessControl
AccessControl enables or disables access control on a target
node. Access to the target node is keyed to the iSCSI qualified
name of whitelisted initiators in the target's access control
list.
set AccessControl [Target Name | target ID] [enabled |
disabled]
get AccessControl [Target Name | target ID | all]
AccessEntry
AccessEntry allows the addition or deletion of an initiator
entry from the access control list of a target node. The
initiator name is converted to lower case and must be
between 16 and 223 characters.
NOTE: For 'set AccessEntry','delete' is optional when
specifying
an initiator name, but is required if specifying 'all'.
set AccessEntry [Target name | target ID] [initiator name
<delete> | all [delete]]
get AccessEntry [Target name | target ID | all]
ClearCliLog (Immediate)
Clears the contents of the CLI command log.
ClearCliLog
ClearEventLog (Immediate)
Clears the contents of the event log.
ClearEventLog
ControllerName
ControllerName provides a descriptive ASCII name assigned to
the unit. This field is used by applications to identify individual
units. The specified name can be up to a maximum of 32
characters. If the name contains spaces, it must be enclosed in
quotation marks.
set ControllerName [name]
get ControllerName
CoreDumpInfo (Immediate)
Displays information concerning all core dumps stored by a
prior fault.
CoreDumpInfo
Date
Sets/displays the current date and time, in the format of
YYYY-MM-DD HH:MM:SS.
NOTE: When using this command to configure the date,
"Timesync" must already be disabled.
set Date [YYYY-MM-DD] [HH:MM:SS]
get Date
DNSDomain
Configures the global value for the DNS domain.
Up to 6 domains can be specified, each seperated by a space.
The list can be cleared by calling set with 'Clear' as the value.
set DNSDomain [domain url] x 6 | Clear]
get DNSDomain
DNSNameServer
Configures the global value for the DNS name server.
Up to 3 IPv4 or IPv6 name servers can be specified, each
seperated by a space. The list can be cleared by calling set
with 'Clear' as the value.
set DNSNameServer [[IPv4 Address | IPv6 Address] x 3 |
Clear]
get DNSNameServer
DumpCliLog (Immediate)
Dumps the contents of the CLI command log to the current CLI
session.
DumpCliLog
Advertisement
Table of Contents
